主要技术特点
● 匹配东方红发动机,动力储备大,油耗低,经济效益高。
● 可选装多态变频开关
● 进口高强度粉末冶金材料离合器片,传递能力高,效果可靠。
● 可汉字显示故障的组合仪表,方便用户随时监控整车状态。
● 配备KA预滤器和唐纳森空滤器,过滤效果好,维护方便。
● 立式双油缸强压入土提升器,提升力大,作业适应性好。
● 液压系统独立油路,清洁度高,故障率低。
● 成熟稳定的前驱动桥,传递扭矩大。
● 采用(3+1)×2组成式变速箱,24F+8R档位,速度匹配合理,操纵方便舒适。
● 配备200L大容量柴油箱,持续作业时间长,效率高。
● 双油缸强压入土提升器,提升力大,作业适应性好。
● 全液压转向系统,驾驶轻便灵活。● The DongFangHong series engine equipped leads a large power reserve, low fuel consumption and high economic benefits.
● Optional multi-state variable frequency switch is offered.
●The imported high-strength powder metallurgy material is used for clutch disc with reliable transmission performance.
● Combined dashboards displaying faults in Chinese are convenient for users to monitor the whole tractor condition at any time.
●The KleanAire prefilter and the Donaldson air filter are installed with good filtering effect and convenient maintenance.
● Double vertical oil cylinders with pressure transfer system lifter support large lifting force and good operation adaptability.
● Independent oil circuit of hydraulic system ensure high cleanliness and low failure rate for it.
● Mature and stable front drive axle with large Transmitted torque.
● (3+1) × 2 composition transmission gives reasonable speed matching with 24F+8R gear showing convenient and comfortable operation.
● A 200L large-capacity diesel tank is equipped to satisfy long-term continuous operation need efficiently.
● Fully hydraulic steering system leads easy and flexible drive.
型号Tractor Model | LT1404-2 |
驱动方式Drive Type | 4×4 |
外形尺寸 长×宽×高Overall Dimension L×W×H(mm) | 4740x2170x2990 |
轴距Wheel base(mm) | 2445 |
前轮轮距Front wheel tread(mm) | 1750 |
后轮轮距Rear wheel tread(mm) | 1700 |
最小离地间隙Min. ground clearance(mm) | 420 |
最小使用质量Min. operating weight (KG) | 4700 |
变速箱挡数(前进+后退)Gearbox gears number | 24F+8R |
发动机Engine | 型号Model | LR6A3LR22/1030 |
额定功率Rated power (Kw) | 103 |
额定转速Rated speed (r/min) | 2200 |
轮胎型号Tires spec. | 前轮Front tires | 12.4-24 |
后轮Rear tires | 16.9-34 |
转向方式Steering Type | 全液压前轮转向Full hydraulic front wheels steering |
最大提升力Max. lifting force( KN ) | 247.7 |
动力输出PTO | 形式Type | 后置、独立式Rear-mounted, Independent type |
转速Speed (r/min) | 760/85pto |
功率Power(Kw) | 87.6 |
耕深控制方式Control type of ploughing depth | 高度控制、浮动控制Height control & flotation control |